Permit|Deny) (Tcp|Udp) Any Host Ipaddr [Eq] [<0-65535>] [Ifname] - Asus GIGAX 2024M Cli Manual

Layer 2 managed switch
Hide thumbs Also See for GIGAX 2024M:
Table of Contents

Advertisement

Command Mode IP extended access-list mode
No/clear
Show
Default
Description
Examples
13.48 (permit|deny) (tcp|udp) any host IPADDR [eq]
[<0-65535>] [IFNAME]
Syntax
Parameters
GigaX2024B/M L2 Managed Switch CLI Manual
Udp->
Icmp->
.any
eq
<0-65535>
.host
IPADDR
[IFNAME]
no (permit|deny) (tcp|udp) any [eq] [<0-65535>] host IPADDR
[IFNAME]
Show acces-lists [number|name]
This command specify one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
ASUS(config-ext-acl)#permit tcp any eq 2 host 10.0.0.2 [fa1/0/1]
(permit|deny) (tcp|udp) any host IPADDR [eq] [<0-65535>]
[IFNAME]
permit->
deny->
Ip ->
Tcp->
Udp->
Icmp->
any
host
IPADDR
User Datagram Protocol
Internet Control Message Protocol
any source address
Match only packets on a given port numbe
Port number
A single destination host
Destination address
Egress interface name
Specify packets to forward
Specify packets to reject.
Any Internet Protocol
Transmission Control Protocol
User Datagram Protocol
Internet Control Message Protocol
any source address
A single destination host
Destination address
123

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gigax 2024bGigax2024b/m

Table of Contents