Pairing Smartlink+ With Your Mobile Phone - Phonak SmartLink+ User Manual

sections overleaf. (Note: some Bluetooth devices perform this
connection procedure automatically after pairing is complete.)

Pairing SmartLink+ with your mobile phone

As mentioned previously, it is only necessary to perform
the pairing procedure once. This procedure is controlled by your
mobile phone.
Different mobile phones have different menu structures. Please
refer to your mobile phone's user guide or dealer support if you
cannot complete the pairing procedure with the generic steps
described here:
J Charge and turn ON both your SmartLink+ and mobile phone.
Place them next to each other.
J Locate your phone's connectivity settings. Look for
"Bluetooth" feature in the main menu or one of the submenus
(possibly named "Connectivity" or "Connections").
J Once found, ensure that your phone's Bluetooth feature is
turned on.
J Initiate the pairing process on your SmartLink+ by pressing
and holding the green telephone button for 2 seconds, until
the display starts blinking. After 2-3 seconds the Bluetooth
sign will appear. Your SmartLink+ will remain in the pairing
mode for one minute or until the pairing is completed.
41