Topcom BUTLER 930 User Manual page 13

7.4 Receiving a Call
During internal or external incoming call, the handset will start to ring. You can change the
ring volume by pressing the up or down keys
• All subscribed handsets will ring when you receive a call.
• The telephone number of the caller appears on the display if you have Caller ID service
(CLIP). Consult your telephone company. The name of the caller also appears on the
display if:
– the number is programmed into the phonebook with name.
– the network sends the name together with the telephone number .
• Press the off hook key
• OR Lift the handset off its base unit (if the auto answer option is active, see §"7.21 Auto
answer").
• During the conversation the
to run.
• After finishing your call, press the on hook key
back on the base unit.
7.5 Redial list options
When scrolling through the redial list (see §"7.3.4 Redial one of the last 10 numbers dialed")
you have the following options:
When the desired number is shown on the display press 'More'
and down keys
15
• 'Add to PB': to store the number into the phonebook memory. Press 'Select' to confirm.
Enter a name (See §"10.1 Adding a number and a name to the phonebook") and press
'Next' . Edit the number and press 'Next'. Select the desired ring melody and press
13
'Save' .
13
• 'Delete Call': to delete an entry in the redial list. Press 'Del' to confirm.
• 'Delete All': to delete all entries in the redial list. Press 'Del' to confirm.
7.6 Activate / deactivate handsfree function
This function allows you to communicate without having to pick up the handset. When you
are talking, press the handsfree key
12
Press the button again to deactivate the handsfree function.
When you are calling in handsfree mode and you want to change the
volume, press up or down key
When you use the handsfree function for a long time, the batteries
will drain quickly !
7.7 'Out of range' warning
If the handset is out of range of the base unit, a warning signal will sound.
• 'SEARCHING' appears on the display and the symbol
• Move closer to the base unit.
• As soon as you are back within range of the base unit, a signal sounds and the symbol
stops blinking.
Butler 930
12
to accept the external call.
symbol appear on the display and the call timer starts
/
7 the following options:
12
/
.
15 7
6
to hang up or put the handset
to activate the handsfree function.
/
15 7
Butler 930
and select with the up
13
repeatedly.
blinks on the display.
13