Topcom BUTLER 930 User Manual page 14

Butler 930
7.8 Setting the speaker volume
Use the up and down keys
speaker. You can select from 5 levels.
The handsfree volume can be set the same way as above!
7.9 Call Duration Indicator on the Display
During an external call, the call duration is shown on the display:
E.g. "01:10:40" for 1 hour, 10 minute and 40 seconds.
The call duration remains visible on the display for 5 seconds after each call.
7.10 Turning off the microphone (mute)
To turn off the microphone during a call press the right menu key 'Mute'
can speak freely without the caller being able to hear you. To activate the microphone again,
press the right menu key 'Mute'
7.11 Pause key
If you dial a telephone number and you would like to add a pause to this number, press the
pause/redial key
When you dial or redial this number, the pause (3 seconds) is automatically included.
7.12 Locating a misplaced handset (paging)
If you cannot find the handset, briefly press the paging key
All handsets subscribed on the base unit will ring so you can locate the misplaced handset.
To stop the signal, briefly press any key on any handset.
7.13 Using the alphanumeric handset keypad
Use the alphanumeric keypad to type text. To select a letter, press the corresponding
alphanumeric key
appears on the display. Press it repeatedly to select other characters from this key.
Press the '2' key once to select the letter 'a'. If you would like to select both 'a' and 'b' after
each other, first press the '2' key once to select 'a', wait 2 seconds until the cursor moves to
the next position and then press the '2' key twice to select 'b'. You can delete characters
mistakenly typed by using the 'Erase' key. The character in front of the cursor will be deleted.
You can move the cursor by pressing the up and down keys
7.14 Setting the ring volume level on the handset
You can change the ring volume of an incoming call (internal and external) between 6 levels
(levels '1' to '5' and 'Off').
If you select level 'Off' the handset will not ring when a call is received.
Level '5' is the highest level.
7.14.1 Setting the ring volume and Melody for Internal and external calls
• Press the 'Menu' key.
• Press the up or down key
• Press 'Select' to confirm.
14
/
15
again.
5
at the desired place in the number.
4
. E.g. if you press the alphanumeric key '5', the first character 'j'
8
/
15
7 during conversation to set the volume of the
7 repeatedly until 'HS Settings' is selected.
key. Now you
5
on the base unit.
17
/
15 7 .
Butler 930