Brickcom Fixed Box Series User Manual page 30

If the camera supports the EasyLink™ function, the following page will be displayed.
Otherwise, this page will not be shown. User can also simply skip this step by clicking on
"Skip."
EasyLink™ is a unique Brickcom function which allows users to assign a unique
EasyLink™ name to their network camera's IP address. There is no need to configure
the router to open up ports or remember hard-to-memorize IP addresses. Users can log
onto [uniqueEasyLinkname].mybrickcom.com to view the camera's web GUI and live
view.
Enter a unique EasyLink name which length must be between 5-32 characters.
When finished, click the arrow button to continue.
When the IP address settings have been configured, the screen will either display a
successful or failed connection message. If the connection failed, either try again or
quit the installation.
29