Configuring The Printer; Configuring The Printer From The Printer Home Page - Intermec PF8d User Manual

Configuring the Printer

Configuring the Printer From the Printer Home Page

PF8d and PF8t Desktop Printer User's Guide
8 Type ^XSET,USBETHERNET,1 and press Enter.
9 Test your connection by typing UQ in the main window and
pressing Enter. Information about your printer appears.
To send commands
• Type a command in the terminal window and press Enter. For a
list of commands, see the
Printer Programmer's Reference Manual.
You can configure your printer:
from the printer home page. Intermec recommends using this
•
method to configure your printer.
using PrintSet. PrintSet is available on the PrinterCompanion CD.
•
The latest version is available from the Intermec web site at
www.intermec.com.
Note: If PrintSet is not available, you can use the temporary
EasyLan Control Center Tool (ECCT) to set the TCP/IP and IP
addresses. The ECCT is available on the Printer Companion CD.
• by sending commands from your PC.
You can configure most network settings from the printer home page.
To configure the printer from the printer home page
1 In a HyperTerminal window, type ! U1 getvar "ip.addr"
and press Enter. The IP address for your printer is displayed.
2 Start a web browser application.
Chapter 2 — Connecting the Printer
ESim for the PC4, PF8, PD41, and PD42
45