Rear Speakers - HP ENVY 17 Maintenance And Service Manual

3. Remove the 2 Phillips PM 2.5x3 screws securing the keyboard to the top cover (1), slide the
keyboard to release it from the tabs, and then remove the keyboard from the top cover (2).
Reverse this procedure to install the keyboard.

Rear speakers

Description
Speaker Kit (includes left and right speakers and cable)
Before removing the rear speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the display panel (see
6. Remove the service cover (see
7. Remove the hard drive (see
8. Remove the RTC battery (see RTC battery (see
9. Remove the memory modules (see
10. Remove the WLAN module (see
84 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 39),
Display panel on page
Service cover on page
Hard drive on page
Memory modules on page
WLAN module on page
50).
40).
41).
RTC battery on page 54).
43).
44).
Spare part number
720261-001