Display Panel - HP ENVY 17 Maintenance And Service Manual

Display panel

NOTE: The TouchScreen display assembly is spared as a whole unit assembly only. The non-
TouchScreen display is spared at the subcomponent level only.
Before removing the display panel, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Remove the display panel:
1. Open the computer.
2. Remove the 2 screw covers (1) on the left and right side base of the display panel.
NOTE:
3. Remove the 2 screws (2) on the left and right hinges that secure the display panel to the
computer.
NOTE:
4. Loosen the edges of the plastic bezel cover (3) from all four sides of the display panel.
50 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page
Use a sharp probe to pop the covers out to avoid scratching the bezel.
Support the display panel as you are removing the screws.
39).