Page 3
The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
Page 4
HP End User License Agreement (EULA). If you do not accept these license terms, your sole remedy is to return the...
Page 6
Safety warning notice To reduce the possibility of heat-related injuries or of WARNING! overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
Update your antivirus software—Protect your computer from damage caused by viruses. The software is preinstalled on the computer and includes a limited subscription for free updates. For more information, refer to the HP Notebook Reference Guide. ● Get to know your computer—Learn about your computer features.
You can also view and control the bass settings through the NOTE: Windows operating system. Select Start > Control Panel > Hardware and Sound > HP Beats Audio Control Panel > Equalization to view and control the bass properties. The following table shows and describes the Beats Audio icons.
screen, with the Recycle Bin at the top. To customize Fences or to refer to the software Help for Fences, select Start > All Programs > Stardock. Click Fences, and then click Fences.lnk. ATI Eyefinity Multi-Display technology Your computer supports the new ATI that provides the following features: ●...
● Disconnect Projector only mode—Turns off the external display and displays the image only on the computer display. ● Duplicate mode—Clones the computer display onto an external display that is connected to the external monitor port (VGA) on the computer. ●...
To access Help and Support, select Start > Help and Support. NOTE: For country- or region-specific support, go to http://www.hp.com/support, select your country or region, and follow the on-screen instructions. Regulatory, Safety, and Environmental Notices To access the notices, select Start > Help and Support >...
Page 17
– or – Go to http://www.hp.com/go/orderdocuments. *You may find the expressly provided HP Limited Warranty applicable to your product located with the electronic guides on your computer and/or on the CD/DVD provided in the box. Some countries/ regions may provide a printed HP Limited Warranty in the box. In countries/regions where the...
Getting to know your computer TouchPad Component TouchPad light Left TouchPad button Right TouchPad button TouchPad zone Description Turns the TouchPad on and off. Quickly double- tap the TouchPad light to turn the TouchPad on and off. Functions like the left button on an external mouse.
Lights Component TouchPad light Caps lock light Power light Mute light Wireless light Chapter 2 Getting to know your computer Description ● Amber: The TouchPad is off. ● Off: The TouchPad is on. ● White: Caps lock is on. ● Off: Caps lock is off.
5 seconds to turn off the computer. To learn more about your power settings, select Start > Control Panel > System and Security > Power Options, or refer to the HP Notebook Reference Guide.
Keys Component Windows logo key Action keys Windows applications key Integrated numeric keypad Optical drive eject key Chapter 2 Getting to know your computer Description Displays system information when pressed in combination with the key. Executes frequently used system functions when pressed in combination with the key.
Off: The computer is off or in Hibernation. ● Blinking white: The hard drive is being accessed. ● Amber: HP ProtectSmart Hard Drive Protection has temporarily parked the hard drive. NOTE: For information on HP ProtectSmart Hard Drive Protection, refer to the HP Notebook Reference Guide.
Right-side Component USB ports (2) Digital Media Slot Optical drive Battery light Chapter 2 Getting to know your computer Description Connect optional USB devices. Supports the following digital card formats: ● Memory Stick ● Memory Stick Pro ● MultiMediaCard ● Secure Digital (SD) Memory Card ●...
Page 24
Component Power connector Security cable slot Description Connects an AC adapter. Attaches an optional security cable to the computer. NOTE: The security cable is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen. Right-side...
Left-side Component Vent External monitor port RJ-45 (network) jack Mini DisplayPort HDMI port eSATA/USB port SuperSpeed USB port Chapter 2 Getting to know your computer Description Enables airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating.
Page 26
Component Audio-out (headphone) jack/Audio- in (microphone) jack Audio-out (headphone) jack Description Produces sound when connected to optional powered stereo speakers, headphones, earbuds, a headset, or television audio. Also connects an optional headset microphone. WARNING! To reduce the risk of personal injury, adjust the volume before putting on headphones, earbuds, or a headset.
Send and receive wireless signals to communicate with wireless local area networks (WLAN). Record sound. On: The webcam is in use. Records video and captures still photographs. To access the webcam, select Start > All Programs > HP > HP MediaSmart > HP MediaSmart Webcam.
Page 28
Component Internal display switch *The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around the antennas free from obstructions. To see wireless regulatory notices, refer to the section of the Regulatory, Safety, and Environmental Notices that applies to your country or region.
Bottom Component Subwoofer Battery bay Vents (7) Hard drive bay Chapter 2 Getting to know your computer Description Contains the subwoofer speaker. Holds the battery. NOTE: The battery is preinstalled in the battery bay at the factory. Enable airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and...
Page 30
Component Memory module compartment Battery release latch Description Holds the memory modules. Releases the battery from the battery bay. Bottom...
Setting up a new WLAN network on page ● Wired—You can access the Internet by connecting to a wired network. For information on connecting to a wired network, refer to the HP Notebook Reference Guide. Chapter 3 Networking Connecting to an existing WLAN on page 22...
Using an Internet service provider (ISP) Before you can connect to the Internet, you must establish an ISP account. Contact a local ISP to purchase Internet service and a modem. The ISP will help set up the modem, install a network cable to connect your wireless computer to the modem, and test the Internet service.
● Bluetooth® device For more information on wireless technology and connecting to a wireless network, refer to the HP Notebook Reference Guide and information and Web site links provided in Help and Support. Connecting to an existing WLAN Turn on the computer.
Setting up a new WLAN network Required equipment: ● A broadband modem (either DSL or cable) (1) and high-speed Internet service purchased from an Internet service provider (ISP) ● A wireless router (purchased separately) (2) ● Your new wireless computer (3) Some modems have a built-in wireless router.
Protecting your WLAN When you set up a WLAN or access an existing WLAN, always turn on security features to protect your network from unauthorized access. For information on protecting your WLAN, refer to the HP Notebook Reference Guide. Chapter 3 Networking...
Keyboard and pointing devices Using the keyboard Using the action keys Action keys are customized actions that are assigned to specific keys at the top of the keyboard. To use an action key, press and hold this key to activate the assigned action.
Page 37
Icon Action Switch screen image Keyboard backlight Volume down Volume up Mute Wireless prt sc Print screen Chapter 4 Keyboard and pointing devices Description Switches the screen image among display devices connected to the system. For example, if a monitor is connected to the computer, this key alternates the screen image from computer display to monitor display to simultaneous display on both the computer and the monitor.
You can also view and control the bass settings through the Windows operating system. Select Start > Control Panel > Hardware and Sound > HP Beats Audio Control Panel > Equalization to view and control the bass properties. key (2) or...
Using the keypad Using the integrated numeric keypad Component Integrated numeric keypad Chapter 4 Keyboard and pointing devices Description Can be used like an external numeric keypad. NOTE: The computer does not have a num lock key.
Using pointing devices In addition to the pointing devices included with your computer, NOTE: you can use an external USB mouse (purchased separately) by connecting it to one of the USB ports on the computer. Setting pointing device preferences Use Mouse Properties in Windows® to customize settings for pointing devices, such as button configuration, click speed, and pointer options.
Page 41
Chapter 4 Keyboard and pointing devices...
Selecting Use the left and right TouchPad buttons like the corresponding buttons on an external mouse. Using TouchPad gestures The TouchPad supports a variety of gestures. To use TouchPad gestures, place two fingers on the TouchPad at the same time. To turn the gestures on and off: Double-click the Synaptics icon far right of the taskbar, and then click the Device Settings tab.
Scrolling Scrolling is useful for moving up, down, or sideways on a page or image. To scroll, place two fingers slightly apart on the TouchPad and drag them across the TouchPad in an up, down, left, or right motion. Scrolling speed is controlled by finger speed. NOTE: Pinching/Zooming Pinching allows you to zoom in or out on images or text.
Maintenance Removing or inserting the battery The battery is preinstalled in the battery bay at the factory. NOTE: For additional information on using the battery, refer to the HP NOTE: Notebook Reference Guide. Removing the battery Removing a battery that is the sole power source for the CAUTION: computer can cause loss of information.
Inserting the battery Align the tabs on the battery with the notches on the outer edge of ▲ the battery bay (1), and rotate the battery into the battery bay until it is seated (2). The battery release latch (3) automatically locks the battery into place.
Replacing or upgrading the hard drive To prevent information loss or an unresponsive system: CAUTION: Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the hard drive while the computer is on, in the Sleep state, or in Hibernation.
Page 47
Remove the hard drive cover (2). Chapter 5 Maintenance...
Page 48
Disconnect the hard drive cable (1) from the computer, and then lift the hard drive (2) out of the hard drive bay. Replacing or upgrading the hard drive...
Page 49
Disconnect the hard drive cable from the hard drive. Chapter 5 Maintenance...
Installing a hard drive Connect the hard drive cable to the hard drive. Replacing or upgrading the hard drive...
Page 51
Insert the hard drive (1) into the hard drive bay, and then connect the hard drive cable (2) to the computer. Align the tabs (1) on the hard drive cover with the notches on the computer. Close the cover (2). Chapter 5 Maintenance...
Tighten the hard drive cover screws (3). Replace the battery. Reconnect external power and external devices. Turn on the computer. Adding or replacing memory modules The computer has two memory module slots. The memory module slots are located on the bottom of the computer under the hard drive cover. The memory capacity of the computer can be upgraded by adding a memory module or replacing the existing memory module in one of the memory module slots.
Page 53
Electrostatic discharge (ESD) can damage electronic CAUTION: components. Before beginning any procedure, ensure that you are discharged of static electricity by touching a grounded metal object. To use a dual-channel configuration when adding a second NOTE: memory module, be sure that both memory modules are the same capacity.
Page 54
Remove the hard drive cover (2). Remove the memory module compartment cover. Loosen the 2 memory module compartment cover screws (1). Adding or replacing memory modules...
Page 55
Remove the memory module compartment cover (2). If you are replacing a memory module, remove the existing memory module: Pull away the retention clips (1) on each side of the memory module. The memory module tilts up. Chapter 5 Maintenance...
Page 56
Grasp the edge of the memory module (2), and then gently pull the module out of the memory module slot. To prevent damage to the memory module, hold the CAUTION: memory module by the edges only. Do not touch the components on the memory module.
Page 57
Gently press the memory module (3) down, applying pressure to both the left and right edges of the memory module, until the retention clips snap into place. Replace the memory module compartment cover. Align the tabs (1) on the memory module compartment cover with the notches on the computer.
Page 58
Tighten the 2 memory module compartment cover screws (3). Replace the hard drive cover. Align the tabs (1) on the hard drive cover with the notches on the computer. Close the cover (2). Adding or replacing memory modules...
Page 59
Tighten the 2 hard drive cover screws (3). Replace the battery. Reconnect external power and external devices. Turn on the computer. Chapter 5 Maintenance...
Routine care Cleaning the display To prevent permanent damage to the computer, never spray CAUTION: water, cleaning fluids, or chemicals on the display. To remove smudges and lint, frequently clean the display with a soft damp, lint-free cloth. If the screen requires additional cleaning, use premoistened antistatic wipes or an antistatic screen cleaner.
Updating programs and drivers HP recommends that you update your programs and drivers on a regular basis. Go to http://www.hp.com/support to download the latest versions. You can also register to receive automatic update notifications when they become available. Chapter 5 Maintenance...
Recovery discs HP recommends that you create recovery discs to be sure that you can restore your computer to its original factory state if the hard drive fails, or if for any reason you cannot recover using the recovery partition tools.
HP Web site. If you use an external optical drive, it must be connected directly to a USB port on the computer, not to a USB port on an external device, such as a USB hub.
● You can recover only files that you have previously backed up. HP recommends that you use HP Recovery Manager to create a set of recovery discs (entire drive backup) as soon as you set up the computer. ● Windows has its own built-in repair features, such as System Restore.
Recovering using the recovery discs If possible, back up all personal files. Insert the first recovery disc into the optical drive on your computer or an optional external optical drive, and then restart the computer. Follow the on-screen instructions. Backing up your information You should back up your computer files on a regular schedule to maintain a current backup.
Using Windows Backup and Restore Windows Backup and Restore allows you to back up individual files or back up the entire computer image. Guidelines: ● Be sure that the computer is connected to AC power before you start the backup process. ●...
Create a system restore point Select Start > Control Panel > System and Security > System. In the left pane, click System Protection. Click the System Protection tab. Follow the on-screen instructions. Chapter 6 Backup and recovery...
Restore to a previous date and time To revert to a restore point (created at a previous date and time), when the computer was functioning optimally, follow these steps: Select Start > Control Panel > System and Security > System. In the left pane, click System Protection.
Customer support Contacting Customer Support If the information provided in this Getting Started guide, in the HP Notebook Reference Guide, or in Help and Support does not address your questions, you can contact HP Customer Support at: http://www.hp.com/go/contactHP For worldwide support, click Contact HP worldwide on the left...
Page 70
Component Product name Serial number (s/n) Part number/Product number (p/n) Warranty period Model description Have this information available when you contact technical support. The serial number label is affixed to the bottom of the computer. ● Microsoft® Certificate of Authenticity—Contains the Windows Product Key.
50–60 Hz. Although the computer can be powered from a standalone DC power source, it should be powered only with an AC adapter or a DC power source supplied and approved by HP for use with this computer. The computer can operate on DC power within the following specifications.
Operating environment Factor Temperature Operating (writing to optical disc) Nonoperating Relative humidity (noncondensing) Operating Nonoperating Maximum altitude (unpressurized) Operating Nonoperating Metric 5°C to 35°C -20°C to 60°C 10% to 90% 5% to 95% -15 m to 3,048 m -15 m to 12,192 m U.S.
Page 73
Index action keys adjusting volume 26 Help and Support 25 identifying 10 keyboard backlight 26 muting speaker sound 26 screen brightness down 25 screen brightness up 25 switching screen image 26 using 25 wireless 26 ATI Catalyst Control Center 4 ATI Eyefinity 3 audio-in (microphone) jack, identifying 15 audio-out (headphone) jack, identifying 15...
Page 74
keyboard backlight action key 26 keyboard hotkeys, identifying 27 keypad, integrated 10, 28 keys action 10 esc 10 fn 10 optical drive eject 10 Windows applications 10 Windows logo 10 labels Bluetooth 59 Microsoft Certificate of Authenticity 59 regulatory 59 serial number 58 wireless certification 59 WLAN 59...
Page 75
Stardock Fences 2 MyColors 2 subwoofer, identifying 18 SuperSpeed USB port, identifying 14 supported discs 52 system failure or instability 51 system information hotkey 27 system recovery 52 system restore points 51, 55 system restore, using 55 TouchPad buttons 7 navigating 29 selecting 31 turning on and off 29...