Hard Drive - HP ENVY 17 Maintenance And Service Manual

Hard drive

Description
1.5 TB 5400-RPM SATA RAW 9.5 mm
1-TB, 5400-RPM
1-TB, 5400-RPM hybrid
750-GB, 5400-RPM
750-GB, 5400-RPM hybrid
500-GB, 5400-RPM
500-GB, 5400-RPM hybrid
Before removing the primary hard drive or secondary hard drive (select models only), follow these
steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service cover (see
Remove the primary hard drive:
1. Disconnect the hard drive cable from the system board (1), and then remove it (2).
Battery on page 39).
Service cover on page
Spare part number
747375-001
676521-001
731999-001
634250-001
732001-001
683802-001
732000-001
40).
Component replacement procedures 41