Advertisement
Ignitions
1. Depress and turn the control knob
for the burner, the left to Max. flame
2. The ignition electrode will emit
sparks, and when the mixture of gas
and air is correct, the burner will be
ignited. Is not possible to connect
the unit to mains, a match may be
used to ignite the burner
3. After starting the burner, press the
control knob for approx. 10
seconds to activate the automatic
thermo couple.
4. Important Ignition position is at
Max flame
10
3. Place the cover plate over. See
fig. 3.
4. Finally, fit the outer burner ring,
taking care that the guide pin
engages in the notch. See fig. 4.
Cover plate
Fig. 3
Fig. 4
Outer burner ring
15
Advertisement
