Related Manuals for Electrolux EHT 6415
Summary of Contents for Electrolux EHT 6415
- Page 1 Руководство пользователя Gas hob Газовая варочная панель EHT 6415...
- Page 2 2 electrolux...
- Page 3 electrolux 3 Welcome to the world of Electrolux Thank you for choosing a first class product from Electrolux, which hopefully will provide you with lots of pleasure in the future. The Electrolux ambition is to offer a wide variety of quality products that make your life more comfortable.
-
Page 4: Table Of Contents
4 electrolux Contents Instructions for the User Important Safety Information Description of the Hob Operation Maintenance and Cleaning Something Not Working? Service and original spare parts Instructions for the Installer Engineers Technical Data Gas Connection Electrical Connection Adaptation to different Types of Gas Building In Possibilities for Insertion Guide to Use the instructions... -
Page 5: Important Safety Information
electrolux 5 ENGLISH Important Safety Information These warnings are provided in the interest of safety. You must read them carefully before installing or using the appliance. It is most important that this instruction book should be retained with the appliance for future reference. - Page 6 6 electrolux • Accessible parts of this appliance may become hot when it is in use. Children should be KEPT AWAY until it has cooled. • Children can also injure themselves by pulling pans or pots off the hob. About Installation, Cleaning and Manteinance •...
-
Page 7: Description Of The Hob
electrolux 7 Service • Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by unexperienced persons may cause injury or serious malfunctioning. Refer to your local Service Centre. Always insist on genuine spare parts. Environmental Information •... -
Page 8: Operation
8 electrolux INSTALLATION Any gas installation must be carried out by qualified personnel, and in accordance with existing rules and regulations. The relevant instructions are to be found in the second section of this manual. Please, ensure that, once the hob is installed, it is easily accessible for the engineer in the event of a breakdown. -
Page 9: Using The Hob Correctly
electrolux 9 Using the hob correctly To ensure maximum burner efficiency, it is strongly recommended that you use only pots and pans with a flat bottom fitting the size of the burner used, so that flame will not spread beyond the bottom of the vessel (see the table beside). Burner minimum maximum... -
Page 10: Maintenance And Cleaning
10 electrolux Maintenance and Cleaning Before any maintenance or cleaning can be carried out, you must DISCONNECT the hob from the electricity supply. The hob is best cleaned whilst it is still warm, as spillage can be removed more easily than if it is left to cool. This appliance cannot be cleaned with steam or with a steam cleaning machine. -
Page 11: The Burners
electrolux 11 Keep all objects and materials which can melt away from the cooking surface, e.g. plastics, aluminium foil. Care should be taken when preparing food or drinks containing sugar. If anything of this nature accidentally comes into contact with the ceramic surface it must be scraped off immediately while stlll hot and wiped away to avoid damage to the surface. -
Page 12: Something Not Working
12 electrolux Something Not Working? If the hob is not working correctly, please carry out the following checks before contacting your local Electrolux Service Force Centre. SYMPTOM SOLUTION There is no spark when lighting the Check that the unit is plugged in and gas. -
Page 13: Instructions For The Installer
electrolux 13 Instructions for the Installer Engineer technical data OVERALL DIMENSIONS Width: 580 mm Depth: 510 mm CUT OUT DIMENSIONS Width: 550 mm Depth: 470 mm APPLIANCE CLASS SUPPLY CONNECTIONS Gas: RC 1/2 inch (1/2 inch male) Rear right hand corner Electric: 230 V 50 Hz supply, 3 core flexible cable... - Page 14 14 electrolux Table 1 : By-pass diameters Burner Ø By-pass in 1/100 of mm Auxiliary Semi-rapid Rapid Table 2 : Injectors TYPE BURNER INJECTORS NORMAL REDUCED NORMAL FEEDING OF GAS POWER POWER POWER PRESSURE 1/100 mm mbar Rapid 0,75 0,276 NATURAL Semi-rapid 0,45...
-
Page 15: Gas Connection
electrolux 15 Instruction for the Installer The following instructions about installation and maintenance must be carried out " by qualified personnel in compliance with the regulation in force. The appliance must be electrically disconnected before all interventions. If any " electric supply to the appliance is required to carry out the work, ensure all the necessary precautions are followed. - Page 16 16 electrolux Connection using flexible non metal pipes When the connection can be easily inspected in its full extent, there is the chance to use a flexible pipe according to the rules in force. The flexible pipe must be tightly fixed using clamps according to the rules in force.
-
Page 17: Electrical Connection
electrolux 17 Electrical Connection The appliance is designed to be connected to 230 V monophase electricity supply. The connection must be carried out in compliance with the laws and regulations in force. Before the appliance is connected: 1) check that the main fuse and the domestic installation can support the load (see the rating label); 2) check that the power supply is properly earthed in compliance with the current rules;... -
Page 18: Adaptation To Different Types Of Gas
18 electrolux Adaptation to different Types of Gas Injectors replacement • Remove the pan supports. • Remove the burner's caps and crowns. • With a socket spanner 7 unscrew and remove the injectors (Fig. 5), and replace them with the ones required for the type of gas in use (see table 2:Injectors). -
Page 19: Building In
electrolux 19 Building In Cut Out Size The dimensions of the cut-out are given in the picture. Fig. 7 A = Auxiliary burner SR = Semi-rapid burner R = Rapid burner Dimensions are given in millimeters The hob can be inserted in a built-in kitchen unit whose depth is between 550 mm and 600 mm. The hobs dimensions are shown in Fig. -
Page 20: Fitting The Hob To The Worktop
20 electrolux Fitting the hob to the worktop Before fitting the hob into the cut out, an adhesive seal must be fitted to the underside outside edge of the hob. It is essential that no gaps are left in this seal in order to prevent spillage near the hob seeping into the cabinet below. -
Page 21: Possibilities For Insertion
electrolux 21 Possibilities for Insertion Kitchen unit with door Proper arrangements must be taken in designing the forniture unit, in order to avoid any contact with the bottom of the hob which can be heated when it is operated. The recommended solution is shown in Fig. - Page 22 22 electrolux Fig. 11 Fig. 12 FO 0947 FO 0198 Fig. 13 Fig. 14 FO 0938 FO 0939...
- Page 23 electrolux 23 Service and original spare parts This machine, before leaving the factory, has been tested and studied by many experts and specialists, in order to give you the best results. Any repair work which needs to be carried out should be done with the utmost care and attention.
- Page 24 24 electrolux...
- Page 25 electrolux 25...