Download Print this page

Electrolux EHT 310 X Instruction Book

Electrolux hob

Advertisement

Quick Links

From the Electrolux Group. The world´s No.1 choice.
The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor
use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines,
vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more
than 150 countries around the world.
24
INSTRUCTION BOOK
Model No.
Product No.
Serial No.
325 88-6301 Rev. 1-313
GB
EHT 310 X
949 600 821
HKG
1

Advertisement

loading

Summary of Contents for Electrolux EHT 310 X

  • Page 1 From the Electrolux Group. The world´s No.1 choice. 325 88-6301 Rev. 1-313 The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx.
  • Page 3 It is important to know how the hob works, for which reason we would ask you to read these instructions carefully before using it. Only then we can quarantee that "your new kitchen aid" will fully meet your expectations and requirements that you had when you chose your Electrolux system. Sincerely Electrolux...
  • Page 4 Important to know Service and repair may only be For safety's sake, turn pots and pans so performed by the distributor, or by a that handles do not protrude, thus service organization approved by the inviting accidents. distributor. Only repair parts delivered by the distributor may be used.
  • Page 5 Faults Question: Answer Reservations product and serial numbers on receipt you will always have this information Our liability does not apply in the to hand (See frontpage). There is no spark when lighting the Check whether the 220 - 240 V event that the damage in question is gas? connection has been plugged in.
  • Page 6: Overview

    Overview If the wok-hob does not work Check to see whether a fuse has by an alternative service organisation, blown. approved by the distributor. Only spare parts delivered by the distributor may Check to see whether the relay is be used. Spare parts and service are the switched off.
  • Page 7: Operating

    Operations Technical data Type of gas Panel markings Adjusted to town gas: -8 mbar The operating knob has a ring showing the scale of markings. Category and pressures I1a - 8 mbar Off. Max. nominal load Q, H (Towngas): Max. flame Wok burner = 3,3 kW x 1 and ignition position...
  • Page 8 An opening with a minimum area of 60 Burner cover/burner ring must be present at the back of Burner ring Together with the burner ring the burner the cupboard (see fig.). cover forms a space where the final mixture of gas and air takes place in order to make the gas burn correctly.
  • Page 9 Please note: If the wok is mounted in a Gas installation table top with a cupboard underneath, In accordance with local the flame might be blown out if the requirements for domestic gas door is slammed. cooking appliances. Gas installation must only be The wok-unit has a special pan support carried out by an authorised person.
  • Page 10: Ignition

    Ignitions 1. Depress and turn the control knob Cover plate 3. Place the cover plate over. See Fig. 3 for the burner, the left to Max. flame fig. 3. 2. The ignition electrode will emit sparks, and when the mixture of gas and air is correct, the burner will be ignited.
  • Page 11 Maintenance and cleaning The operating panel with knob pan Installation of wok burner support top plate and burner It is extremely important that covers/rings are to be cleaned with both the inner and outer ordinary cleaning agents. burner rings are fitted correctly into their “guide However, do not use any kind of notch”, otherwise the burner...
  • Page 12: Mounting

    Mounting It is not necessary to attach the Caution: In order to avoid a hazard this reinforcement beam to the work top appliance must be installed according to surface, as it is held in place by a these instructions for installation, also specially designed moulding, which is complying with Gas Safety (installation incorporated in the hob units flanges.