Section 3: Configuration
The DCS-4625 has a comprehensive event system that lets you configure the camera to perform certain actions when an event occurs. For example,
when motion is detected, you can have snapshots sent to an e-mail address. You can also configure the camera to take regular video recordings
according to a schedule you define. Detailed information for the following steps can be found in the following pages.
Step 1:
Select your destination Server and Media type
Server
Media
D-Link DCS-4625 User Manual
Recording Management
Event Management
•
E-mail
•
SD Card
•
Snapshot
•
Video Clip
•
Camera Log
When an event is triggered:
Event
Step 2:
Event
Action
Action
Select your Trigger event and Action
•
Video Motion Detection
•
Periodic
•
Digital Input
•
Camera Boot
•
Network lost
•
Tamper Detection
•
Event schedule
•
Server (can be any pre-selected
media such as snapshot, video
clip, or system log)
Server 1:
E-mail
Server 2:
SD Card
40