Ip & Mac Binding Settings; Binding Setting - NetComm Wireless Router NB504 User Manual

5.9 IP & MAC Binding setting
There are two submenus under the IP &MAC Binding menu (shown in Figure 5-42): Binding Setting and ARP
List. Click any of them, and you will be able to scan or configure the corresponding function. The detailed
explanations for each submenu are provided below.

5.9.1 Binding setting

This page displays the IP & MAC Binding Setting table; you can operate it in accord with your desire. (shown
in Figure 5-43).
• MAC Address - The MAC address of the controlled computer in the LAN.
• IP Address - The assigned IP address of the controlled computer in the LAN.
• Bind - Whether or not enable the arp binding.
• Modify - Edit or delete item.
When you want to add or modify an IP & MAC Binding entry, you can click the Add New button or Modify
button, and then you will go to the next page. This page is used for adding or modifying an IP & MAC Binding
entry (shown in Figure 5-44).
����4 ��e�� ����e
64
Figure 5 4- the IP & MAC Binding menu
Figure 5-43 IP & MAC Binding Setting
Figure 5-44 IP & MAC Binding Setting (Add & Modify)
YML864Rev1
www.netcomm.com.a�