Table of Contents
Advertisement
Chapter 6
Message Format Parameters
Scanner
Identifier
6–4
Scanner ID characters are used to identify individual
scanners when more than one scanner is interfaced
with the host system. Options available are none
(Disabled) or digits 01 through 99.
Scanning label JA disables the scanner identifier.
JA
To enter a scanner ID, scan label JB and then two
separate digits from Appendix B. The ID characters
cannot exceed 99.
JB
For example, to enter a scanner ID of 01, scan the JB
label, then scan codes 0 and 1 in Appendix B.
Disable
Scanner Identifier *
+
Enable Scanner Identifier
plus two characters
Advertisement
Table of Contents
