Appendix C
Autosense Mode
#6-32 Thumb Screws
C–2
Figure C.1
Autostand
Stand Riser
#6-32 Thumb Screws
Important: When the scanner is to be powered from
a battery such as in a hand-held terminal, you should
disable Autosense mode. In this application, you may
need to use the power conservation mode of the
scanner when drawing power from a battery. Auto-
sense mode will function only in full power mode.
1
Reflective tape is supplied with the autostand. Additional reflective tape is
available by ordering Catalog No. 2755-NT1.
Stand Base
Scanner
Scanner Holder
Reflective
Label
1