Table of Contents
Advertisement
Chapter
Objectives
Label
Lengths
Symbologies
This chapter shows how to enable bar code symbol-
ogies the scanner is capable of reading including:
Code 39
UPC-A and UPC-E
(with optional 2 or 5-digit supplements)
EAN-8 and EAN-13
(with optional 2 or 5-digit supplements)
Interleaved 2 of 5
Standard 2 of 5
Code 128
Codabar
To disable or enable specific bar code symbologies,
scan the appropriate bar code labels in each section.
Note: We recommend that you disable all
symbologies not used by your application.
Throughout this chapter, the default symbology
selections are flagged by an asterisk (*).
The minimum label lengths are set to 1 character,
except for Interleaved 2 of 5 which is set to 2
characters and Standard 2 of 5 which is set to 4
characters. The maximum label length for all
symbologies is set to 32 characters. You can set
minimum and maximum label lengths.
Note: The minimum length must be less than or
equal to the maximum length for scanning to occur.
7
Chapter
A–B
7–1
Advertisement
Table of Contents
