Table of Contents
Advertisement
Capture
Count
Capture Count determines the number of successful,
identical decodes that must occur for a valid read.
You can use the capture count to enhance the security
of the bar code reader.
Option BC sets the capture count to 1 which requires
one successful decode.
BC
Scan option BD to set the capture count to 2. Two
identical decodes must occur for a valid read.
BD
Because the laser scans a label many times a second,
you will notice little or no change in the speed of the
decode.
Chapter 5
General Setup Parameters
Capture Count = 1 *
Capture Count = 2
5–5
Advertisement
Table of Contents
