Nortel 1120E User Manual page 23

Press the Return soft key at any time while working with tools in the Local
Diagnostics submenu to return to the Local Diagnostics submenu. Use
the Return key in this way to quickly gather information and run tests
without exiting and reentering the Local Tools menu. For example, you can
check the Ethernet Statistics, then press Return and enter the Network
Diagnostics Tools to ping an IP address.
IP Set and DHCP Information
The Network Configuration tool is used to view reports about IP set and
DHCP operation. This tool is for administrator use only.
Network Diagnostic Tools
The Network Diagnostic Tools menu contains tools that are used to
diagnose network problems. This menu is for administrator use only.
Ethernet Statistics
The Ethernet Statistics tool is used to view reports about Ethernet operation.
This tool is for administrator use only.
IP Network Statistics
The IP Networks Statistics tool is used to view reports about network
operation. This tool is for administrator use only.
USB Devices
The USB Devices tool provides information about any Universal Serial Bus
(USB) devices that you connect to your phone. Your IP Phone 1120E
automatically detects USB devices when you connect them to the USB port
in the back of the IP Phone.
Checking USB device information
Step
1
2
3
Copyright © 2007, Nortel Networks
.
Action
Press the Services key twice.
The Local Tools menu is displayed.
From the Local Diagnostics menu, select USB Devices.
USB device information is displayed.
Press the Return soft key to return to the main display.
Carrier VoIP
Nortel IP Phone 1120E User Guide (CICM)
NN10300-022 02.01 Standard
(I)SN10 15 June 2007
—End—
Local Diagnostics 23