Adjusting The Label Mark Sensor - Intermec EasyCoder 3400e User Manual

Chapter 5— Optimizing Printer Performance

Adjusting the Label Mark Sensor

50
C d
O
The label mark sensor detects the mark on the back of continuous media
stock. The printer uses the output to determine the start of print. The
label mark sensor is behind the platen roller and near the inboard edge of
the printer.
To adjust the label mark sensor
1 Remove the media cover and locate the label mark sensor.
2 Use your index finger to slide the label mark sensor to the correct
position for your media. You can position the label mark sensor
anywhere from the inboard edge of the printer to the center of the paper
path. See the next illustration.
39
Helvetica CondensedHelvetica
Turn the darkness
Darkness
adjust control clockwise adjust control
for darker density
Turn the darkness adjust
control counterclockwise
for lighter density
Screwdriver
3XXXU.037
EasyCoder 3400e Bar Code Label Printer User's Manual