Intermec EasyCoder 3400e User Manual page 63

C d
Locate the label mark sensor
behind the platen roller near
the inboard edge of the printer.
Use your index finger to adjust
the label mark sensor.
EasyCoder 3400e Bar Code Label Printer User's Manual
39
Helvetica CondensedHelvetica
Platen
roller
Inboard edge
of printer.
The platen roller
is not shown
for clarity only.
3 Enable mark printing with PrintSet, your third-party software, or IPL
commands. For help, see PrintSet online help, your third-party
documentation, or the IPL Programming Reference Manual.
4 Print a few labels or press Feed/Pause two times to make sure that the
label mark sensor is detecting the black mark on the media.
5 Replace the media cover.
Chapter 5— Optimizing Printer Performance
Label mark
sensor
(The label mark sensor
can be positioned no
more than 1" from the
inboard edge.)
3XXXU.040
51