Table of Contents
Advertisement
4. Cleaning and care
Fig. 6
8
Caution:
Avoid sharp and caustic cleaning agents as well as
brushes and abrasive cleaners.
Clean the stainless steel tub with mild rinsing
detergent and apply stainless steel care agent to
the metal surfaces using a soft cloth.
Only clean the switch panel with a soft cloth. Do
not use any cleaning agent as it might be agressive
to the inscription markings.
Grease filter cleaning
The grease filter indication symbol lights up on the
operating panel after around 30 hours of operation.
Illumination of this symbol signals to you that the
grease filters have to be cleaned.
You can clean the metal grease filters in a dish-
washer at a maximum temperature of 65 °C / 150 °F .
To do this, place the grease filters in the
dishwasher in such a way that it is cleaned
completely.
Clean the the grease filter at least once a month.
Proceed as follows:
– Turn the "Height adjustment" control knob to the
right to extend the boom slightly. By doing so, you
can detach the cover easily.
– Detach the cover.
– Turn the two retaining wires up and remove the
grease filter from the appliance.
– Turn the control knob to the position
filter indication). This resets the operating time.
Insert in the reverse order.
Caution!
Only clean the grease filter after the appliance has
cooled down.
(grease
Advertisement
Table of Contents
