Set Mode; I Set Mode Programming; I Set Mode Items - Icom IC-M3EURO Instruction Manual

6

SET MODE

I SET mode programming

SET mode is used to change the conditions of 5 transceiver
functions: the beep tone function, the automatic backlighting,
normal/priority scan, scan resume timer and power save func-
tion.
q Turn power OFF.
w While pushing [SQL], turn power ON and continue push-
ing [SQL] until "bP" appears.
e Release [SQL].
r Push [SQL] to select the desired item, if necessary.
t Push [
]/[ ] to select the desired condition of the item.
y To exit SET mode, turn the power OFF, then ON again.
•SET MODE CONSTRUCTION
Power save
Scan resume
timer
12
Beep tone
Automatic
Push
backlighting
Scan type

I SET mode items

D Beep tone
"bP"
You can select silent operation by turning beep tones OFF or
you can have confirmation beeps sound at the push of a
switch by turning beep tones ON. The beep tone volume is
linked with [OFF/VOL].
Beep tone ON (default)
D Automatic backlighting
This function is convenient for nighttime operation. The auto-
matic backlighting turns the backlighting ON when pushing
any key except for [PTT].
• The backlighting is automatically turned OFF after 5 sec. of inactiv-
ity.
Automatic backlighting ON (default)
"bL"