D Tx Code Channel Selection; D Tx Code Number Edit - Icom IC-F61M Instruction Manual

3
BASIC OPERATION

D TX code channel selection

If the transcever has [TX Code CH Select] assgned to t, the nd-
caton can be toggled between the operatng channel number (or
name) and TX code channel number (or name). When the TX code
channel number (or name) s dsplayed, [CH Up] or [CH Down] se-
lects the TX code channel.
USING [TX CODE CH SELECT] KEY:
q Push [TX Code CH Select]— a TX code channel number (or
name) appears.
w Push [CH Up]/[CH Down] to select the desred TX code chan-
nel.
e After selectng, push [TX Code CH Select] to set.
• Return to the stand-by mode.
r Push [Call] to transmt the selected TX code.
USING [TX CODE CH UP]/[TX CODE CH DOWN] KEY:
If the transcever has a [TX Code CH Up] or [TX Code CH Down]
key assgnment, the programmed TX code channel can be se-
lected drectly when pushed.

D TX code number edit

If the transcever has [TX Code CH Select] or [TX Code Enter] as-
sgned to t, TX code contents can be edted wthn the allowable
dgts.
USING [TX CODE CH SELECT] KEY:
q Push [TX Code CH Select] to enter the TX code channel selec-
ton mode.
• Select the desred operatng channel before enterng the TX code
channel selecton mode f necessary.
w Push [TX Code CH Select] for 1 sec. to enter the TX code edt
mode.
• The dgt to be edted blnks.
17