I User Set Mode - Icom IC-F6062 Instruction Manual

I User set mode

User set mode is accessed with [User Set Mode] and allows
you to set seldom-changed settings. In this case you can
"customize" the transceiver operation to suit your preferences
and operating style.
Entering the user set mode:
q While pushing and holding [P1] and [P2], push [
the power ON. Then, push and hold [P0] for 1 sec. to enter
user set mode.
• You should hold [P1] and [P2] until "SET MODE" appears.
[P0] [P1] [P2]
w Push [P0] several times to select the appropriate item.
Then, push [Up] or [Down] to set the desired level/condi-
tion.
• Available set mode functions are Backlight, LCD Contrast,
Beep, Beep Level, Ringer Level, SQL Level, AF Min Level,
Mic Gain, Horn and Signal Moni.
[P0]
] to turn
[ ]
[Up]/[Down]
e Push and hold [
] for 1 sec. to turn power OFF, then ON
again to exit set mode.
User set mode is also available via a programmable key.
Please refer to p. 6 [User Set Mode] section.
2
BASIC OPERATION
[ ]
2
12