Battery Type Selection - Icom IC-F25SR Instruction Manual

' ' Battery type selection

The battery type MUST be selected according to the type of bat-
tery attached when turning the transceiver ON.
Ask your dealer for details.
NOTE: When the selected battery type is not matched to the at-
tached battery, the transceiver does not work correctly.
q Turn power OFF in advance.
w While pushing and holding [PTT],
rotate [VOL] to turn power ON.
e After the transceiver is powered
ON, you should hold [PTT] for 5
sec. to toggle the attached battery
type.
• When the Lithium-Ion battery type is
selected, a beep (Pi) is emitted after
a 5 sec. count.
• When the Alkaline battery type is
selected, 2 beeps (PiPi) are emitted
after a 5 sec. count.
In this case, the LED indicator turns
orange while transmitting a signal.
BASIC OPERATION
[PTT]
3
3
[VOL]
12