Da-Lite ASCENDER ELECTROL Instruction Book page 3

ASCENDER ELECTROL INSTALLATION
®
For installations where the Ascender will be set on the floor, the
box must be secured to floor in at least size places
(recommended hardware is #12 x 2" L wood screws).
Refer to figure 1.
SCREW BOX INTO
FLOOR STUD
FLOOR
FIGURE 1
For installations where the Ascender will be recessed into the
floor, the box must be secured in at least six places
(recommended hardware is #12 x 2" L wood screws).
Refer to figure 2.
FLOOR
BOX FRAME SUPPORT
FIGURE 2
2