Warning/Caution Decals - CYBEX 8800 Owner's Manual

Product Number 8800/8810/8830/8840 Owner's Manual
3. Anchoring holes are provided on the feet of the frame. All anchoring locations must be used when
anchoring the equipment to the fl oor.
4. Due to the wide variation of fl ooring on which machines may be anchored or installed, verify
anchoring method and anchoring fasteners with a qualifi ed and licensed contractor.
5. A minimum pull out force of 220 lbs/100 kgs is required for each anchor position..
6. Do not use machine until it is properly anchored.
MAINTENANCE:
Preventative maintenance allows proper equipment operation and reduces the risk of injury. Perform the
maintenance requirements as specifi ed in the manual.
STANDARD COMPLIANCE:
Cybex products meet or exceed applicable ASTM and EN Standards.

Warning/Caution Decals

Warning decals indicate a potentially hazardous situation, which, if not avoided, could result in death or
serious injury.
Caution decals indicate a potentially hazardous situation, which, if not avoided, could result in minor or
moderate injury.
The warning and caution decals are shown on the following page. The diagrams following the decals
show where each decal is located.
Safety
Page 1-3