Using A Headset; Joining Calls - Avaya Norstar M7310 User Manual

2.10 Using a Headset

Your phone has a headset socket located under the phone. If you connect a headset, it overrides the phone's handsfree
speaker and microphone and is controlled by the Handsfree button (bottom right).
· To answer a call using the headset, press the Handsfree button or the button on which the call is alerting.
· Use the Handsfree button to switch between the headset and the handset.

2.11 Joining Calls

Joining is adding yourself to a call in progress.
· You cannot:
· Join an internal call or a conference call at another extension.
· Join a call at any extension where the extension user has privacy enabled.
· Put a joined call on hold.
· You can:
· Tell when someone has joined your call when you hear a single beep.
· Use privacy to allow or prevent others from joining your calls.
· Join a call that is being answered by the voice messaging system. When you join the call, the voice messaging
system disconnects automatically so you can speak to the caller.
· Dial 68 <Line Number>to join a call on that line if a line is not assigned to a button on your extension.
To Join a Call
A steady icon next to a line button indicates that a call is in progress on that line.
1. If already on a call, end the call (by pressing
2. Press an Intercom or Call Appearance button and dial 68 followed by the two-digit line number. Alternatively, if
you have a button for that line, press the line button and lift the handset.
3. You are now joined with the call. All parties on the call hear a single beep.
Norstar Mode M7310 Phone User Guide
IP Office Basic Edition
Release) or put it on hold (by pressing Hold).
20
- Issue 4a (14 June 2012)
Page 24