Video Connector - IBM 6223 User Manual

distance of 5 meters (16 ft) per segment (if the device that is attached to the
computer is a USB 2.0 device). If multiple USB devices are attached to the
computer, the USB hub must be USB 2.0; otherwise, all USB 2.0 devices will
transfer data at 12 Mbps. Using Plug and Play technology, USB devices are
configured automatically. The following illustration shows a USB connector.
Use a 4-pin USB cable to connect an external devices to a USB connector.
If you connect a PS/2 (non-USB) keyboard to the keyboard connector, USB ports
and devices are disabled during power-on self-test (POST).
If you connect a USB keyboard that has a mouse port, the keyboard emulates a
mouse, and you cannot disable the mouse settings in the Configuration/Setup Utility
program.

Video connector

The PCI Express x16 adapter, which is in PCI slot 1 on the system board, provides
the video connector. This connector is on the rear of the computer. Use the video
connector to connect a monitor or other display device. The following illustrations
show examples of different video connectors.
Analog video connector
Digital (DVI-I) video connector
Dual monitor system-59 (DMS-59) video connector
Some models come with a digital video interface (DVI) connector for connecting a
digital monitor. If you have problems viewing information with a second monitor, see
"Changing monitor settings" on page 15.
Models with the NVIDIA Quadro FX 1300 or NVIDIA Quadro FX 3400 video adapter
come with a DVI-I to VGA style analog converter for each DVI-I connector.
1 4
5 1
15 11
C1 C2
1
C3 C4
C5
Chapter 4. Installing options
69