Replacing The Bezel - IBM 6223 User Manual

5. Thread the cable through the rope clip and around an object that is not part of
6. If you have other options to install or remove, do so now; otherwise, replace the
7. Reconnect the external cables and power cords. Turn on the attached devices,

Replacing the bezel

Complete the following steps to replace the bezel:
1. Insert the tabs on the side of the bezel into the matching holes on the computer
2. Push the bezel toward the computer until the tabs and bezel clips snap into
or permanently secured to the building structure or foundation and from which
the cable cannot be removed. Fasten the cable ends together with a lock. After
you add the security cable, make sure that it does not interfere with other
cables that are connected to the computer.
side cover (see "Replacing the side cover" on page 64).
and turn on the computer.
chassis.
place.
Rope clip
Chapter 4. Installing options
63