Changing Volume Levels; Changing The Ring Tone; Adjusting The Display Contrast - Mitel 5212 User Manual

Changing Volume Levels

You can change the following volume levels:
•
•
•
•
•
NOTE
You must be using the feature to change the volume level. For example, if you want to change
handset volume level, you must be using the handset. However, you can adjust the ringer
(alerting tone) volume level when the endpoint is idle.
To change a volume level:

Changing the Ring Tone

You can select one of nine different ring tones.
To change the ring tone:
1.
2.
3.

Adjusting the Display Contrast

You can adjust the display Contrast setting.
To adjust the Contrast setting:
1.
2.
3.
Mitel ® Model 5212/5224 User Guide – Issue 2, October 2008
Ringer (alerting tone)
Handset
Headset
Background music
External speaker
Turning the external speaker volume down to the lowest levels may prevent you
from hearing the feature "warning tones" that notify you when errors occur (for
example, when you enter an incorrect feature code).
While using the feature, press
decrease the volume. The volume level is automatically saved.
With the handset on-hook, dial 398.
Do one of the following to listen to (or turn off) ring tones:
•
Press 0 to turn the ringer off.
Press (Up) or (Down) or 1 to 9 to listen to ring tones.Press
lift and replace the handset to select the ring tone.
While the handset is on-hook, dial 303.
Do one of the following to adjust the contrast:
•
Press (Up) or
•
Press a number on the dialpad (1 = lightest, 10 = darkest) that corresponds to your
desired contrast level.
To save the setting, press # or
(Up) to increase the volume or press
(Down) to adjust the contrast.
(Speaker).
Personalizing Your Endpoint
(Down) to
(Speaker), #, or
Page 11