Changing Volume Levels; Changing The Ring Tone; Adjusting The Display Contrast - Mitel 8568 User Manual

Changing Volume Levels

You can change the following volume levels:





NOTE
You must be using the feature to change the volume level. For example, if you want to change
handset volume level, you must be using the handset. However, you can adjust the ringer
(alerting tone) volume level when the telephone is idle.
To change a volume level:
To save the volume level:

Changing the Ring Tone

You can select one of nine different ring tones.
To change the ring tone:
1.
2.
3.

Adjusting the Display Contrast

You can adjust the display Contrast setting.
To adjust the Contrast setting:
1.
2.
3.
Mitel ® 8568 Telephone User Guide – Issue 3, February 2011
Ringer (alerting tone)
Handset
Headset
Background music
External speaker
Turning the external speaker volume down to the lowest levels may prevent you
from hearing the feature "warning tones" that notify you when errors occur (for
example, when you enter an incorrect feature code).
While using the feature, press
decrease the volume.
Press (Up) and (Down) simultaneously. Handset volume 11 cannot be saved.
With the handset on-hook, dial 398.
Do one of the following to listen to (or turn off) ring tones:

Press 0 or the RINGER OFF menu button to turn the ringer off.

Press (Up) or

Press the PREVIOUS or NEXT menu buttons to listen to and select a ring tone.
Press (Speaker), #, the ACCEPT menu button, or lift and replace the handset to
select the ring tone.
While the handset is on-hook, dial 303.
Do one of the following to adjust the contrast:

Press (Up) or

Press a number on the dialpad (1 = lightest, 8 = darkest) that corresponds to your
desired contrast level.
To save the setting, press # or
Personalizing Your Telephone
(Up) to increase the volume or press
(Down) or 1 to 9 to listen to ring tones.
(Down) to adjust the contrast.
(Speaker).
(Down) to
Page 11