Changing Volume Levels; Changing The Ring Tone; Adjusting The Display Brightness - Mitel 5360 User Manual

Hide thumbs Also See for 5360:
Table of Contents

Advertisement

Personalizing Your Phone

Changing Volume Levels

You can change the following volume levels:
NOTE
You must be using the feature to change the volume level. For example, if you want to change
the handset volume level, you must be using the handset. However, you can adjust the ringer
(alerting tone) volume level when the IP phone is idle.
To change a volume level:

Changing the Ring Tone

You can select one of nine different ring tones.
To change the ring tone:
1.
2.
3.

Adjusting the Display Brightness

You can adjust the display Brightness levels.
NOTE
To adjust the Brightness level:
1.
2.
3.
4.
Page 16
Ringer (alerting tone)
Handset
Headset
Background music
External speaker
Turning the external speaker volume down to the lowest levels may prevent you
from hearing the feature "warning tones" that notify you when errors occur (for
example, when you enter an incorrect feature code).
While using the feature, press
to decrease the volume. The volume level is automatically saved.
With the handset on-hook, dial 398.
Do one of the following to listen to (or turn off) ring tones:
Press 0 or the RINGER OFF menu button to turn the ringer off.
Press (Up) or (Down) or 1 to 9 to listen to ring tones.
Press the PREVIOUS or NEXT menu button to listen to and select a ring tone.
Press
(Speaker), #, the ACCEPT menu button, or lift and replace the handset to
select the ring tone.
By default, the IP phone display dims to 20 percent of the maximum brightness level
after 5 minutes of inactivity (no button presses or audio, including background
music). If the brightness is set at the lowest level, you may not notice when the
display dims.
Press
(Applications).
Press Settings, and then press Brightness.
Press (Brightness) + or – to find the level you want to use.
Press # or Save to save the setting, and then press Close to exit the Applications menu.
(Up) to increase the volume, or press
Mitel
®
5360 IP Phone User Guide – Issue 1, June 2010
(Down)

Advertisement

Table of Contents
loading

Table of Contents