Repeater Operation - Icom IC-40Jr Instruction Manual

6
A repeater amplifies received signals and re-transmits them on a
different channel, allowing you to communicate over greater dis-
tances with improved reliability. When using a repeater, the transmit
channel is shifted from the receive channel by 30 channels. Please
ask you dealer regarding repeater availability in your local area.
q Push [UP/Y] or [DOWN/Z] to se-
lect the desired channel from 1 to 8.
• If group code appears next to the
operating channel number, push
[MODE], then select " - – – " with
[UP/Y] or [DOWN/Z] to cancel
the group mode (p. 14).
RWARNING!
As group mode is not compati-
ble with repeater operation, no
audio will be heard.
w Push [POWER] momentarily to set repeater mode.
• "RPT" appears in the display.
• The duplex setting affects the selected channel only and the
setting is retained after channel selection.
e Push and hold [PTT] to transmit.
• The displayed channel automatically changes to the transmit
channel (repeater input channel).
r Release [PTT] to receive.
t To cancel the duplex setting, push [POWER] momentarily on the
desired channel.
12

REPEATER OPERATION

While receiving
Repeater
indicator
appears.
While transmitting
w