Ats (Automatic Transponder System); Auto Power Save; Lcd Backlight - Icom IC-40Jr Instruction Manual

10
OTHER FUNCTIONS
' ' ATS
This allows you to confirm whether or not a call has reached the re-
ceiving party even if the operator is temporarily away from the
transceiver. No "Ring" tone is emitted with this function.
Push [MODE], while [PTT] is ON to
turn the function ON/OFF.
• " " appears in the display.
• The transceiver starts to send a
search signal every 60 sec.
- When the transceiver receives
an answer back signal, "
stays on the display until the
next search transmit.
- If no reply is received, " "
flashes until the next search transmit.
NOTE: The above setting is for the calling station only. A called
party automatically sends an answer back signal without any
presettings.
All IC-40Jr's operating on the same operating channel will an-
swer back to your call in your communication area.

' ' Auto power save

The power save function reduces the current drain to conserve
battery power.
- The function automatically starts when no operation is per-
formed or no signal is received for 5 sec.

' ' LCD backlight

Automatically lights ON for 5 sec. when you push any key, ex-
cept [PTT].
20
(Automatic Transponder System)
appears
"