Scan Function - Icom IC-40Jr Instruction Manual

Scanning is an efficient way to locate signals quickly over all chan-
nels. Select scan resume condition in advance, using Initial Set
Mode (p. 18)
CH 40
D Starting the scan
While pushing
[DOWN/Z] to start the scan.
• "-" flashes.
• While pushing [DOWN/Z], push-
ing [UP/Y] also starts the scan.
• Push [DOWN/Z] or [UP/Y] to
change the scanning direction or
resume the scan manually.
• To cancel
[DOWN/Z] (or [UP/Y]) while
[UP/Y] (or [DOWN/Z]) is pushed,
or push [PTT].

SCAN FUNCTION

CH 1
CH 5
[UP/Y], push
the scan, push
CH 2
CH 3
CH 4
7
13