Ring Function; Smart-Ring; Call-Ring - Icom IC-40Jr Instruction Manual

9

' ' Smart-Ring

The Smart-Ring function has an answer back feature. This allows
you to confirm whether or not a call has reached the receiving party.
q Set the same group code number for all
of your group transceivers. (See p. 14)
w While pushing [PTT], push [UP/Y].
• A beep is emitted and "
the display.
e Release the [PTT].
• When a member of your group an-
swers your call, the transceiver emits
beep tones for 10 sec. and "
flashing.
• When no answer comes back, the transceiver emits short faint
beep tones.
r Push [PTT] to answer and to stop the beeps and flashing.
NOTE: This function is available only when the called station has set
the same group number and the same operating channels as you.

' ' Call-Ring

Sends the ring tones during transmit mode.
While pushing [PTT], push [DOWN/Z]
to send a ring tone.
• The ring tone is emitted while pushing
[DOWN/Z].
• The microphone signal is automatically
cut while pushing [DOWN/Z].
16

RING FUNCTION

" flashes in
" stops