2.5.6 Install the door knob:
Attach the wooden knob to
the handle using the Shoulder
screw. Tighen the screw using
the 5/32 hex wrench.
(Figure 26)
2.5.7 Adjusting the door alignment:
To adjust the door positioning and spacing, loosen the hinge pin set screws (Figure 27) and
pivot the hinge until the door is in the correct position. To tilt the door, lock one of the two
hinge pins in place and pivot the other. The door will tilt to one side or the other depending
on the direction the hinge is pivoted. For the door to be straight, both hinges must be aligned
along the same axis.
If the door hinges are misaligned, it will tilt. It is therefore recommended to align them. Once
the ideal position has been achieved, lock the hinges in place by tightening the set screws.
Hearthstone Quality Home Heating Products, Inc ®
Figure 27
29
Figure 26
WFP-75 Model 8410