Install The Facade; Secure The Facade; Adjusting The Blower Door - HearthStone WFP-75 Owner's Manual

2.5.3 Secure the facade:

1. Open the Blower door. (Figure 24)
2. Secure the facade using the 2 self-drilling screws provided. Drive the screws
through the slots in the facade frame into the metal frame of the fireplace. (There are
no pre-drilled pilot holes)
3. If you are planning to install a non-combustible facing material behind the facade,
plan the depth of this material before securing the screws. Refer to section 2.4.3.

2.5.4 Adjusting the blower door

The blower door is held closed by a magnet on the right side of the facade.
To adjust the strength of the closure, spin the magnet to adjust in/out.
Hearthstone Quality Home Heating Products, Inc ®
Figure 24
27 WFP-75 Model 8410