Disposal - Electrolux E3781-5 User Manual

The oven lighting is not oper-
ating
The pyrolysis function is not
working ("C1" is shown in the
time display)
F2 appears in the clock display Door not properly closed or
An error code not listed above
appears in the time display
If you are unable to remedy the problem by following the above suggestions,
please contact your local Service Force Centre.
1
Warning! Repairs to the appliance are only to be carried out by qualified service engi-
neers. Considerable danger to the user may result from improper repairs.
3
If the appliance has been operated incorrectly, the engineer's visit will be chargeable,
even during the warranty period.
3
Advice on cookers with metal fronts:
Because of the cold surface at the front of the cooker, opening the oven door during (or
just after) baking or roasting may cause the glass to steam up.

Disposal

2
Packaging material
The packaging materials are environmentally friendly and can be recycled. The plastic
components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the pack-
aging materials in the appropriate container at the community waste disposal facilities.
2
Old appliance
The symbol
be treated as household waste. Instead it shall be handed over to the applicable collec-
tion point for the recycling of electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent potential negative consequences
Problem
W
on the product or on its packaging indicates that this product may not
Possible cause
The oven light bulb is faulty
Side rails/oven shelf runners
have not been removed
door lock defective
Electronic error
Disposal
Remedy
Replace oven bulb
Remove side rails/oven shelf
runners
Close door properly;
Turn the appliance off and on
again via the house fuse or
the safety switch in the fuse
box;
If displayed again, please con-
tact the Customer Care De-
partment
Switch the appliance off and
on again by way of the house
wiring fuse or the circuit
breaker in the fuse box.
If the display appears again,
please contact customer serv-
ice
41