Table of Contents
Advertisement
Leave room behind the appliance as
described in these instructions to avoid
overheating.
Spacers installation
To ensure a smooth installation of the
appliance, you need the same internal
width as shown in the picture below. Use
the provided spacers to adjust internal
width.
For their correct positioning, place the
spacers directly in contact with both the
shelf and the side of the cabinet.
Support brackets installation
After positioning the spacers, place the
two provided support brackets.
For a correct installation, take the single
support bracket and place it directly in
contact with both the shelf of the cabinet
and the spacer if previously used.
Otherwise the bracket will be in direct
contact with both shelf and side of the
cabinet.
After this first phase, align the support
brackets to be flush with the front of the
cabinet.
Use the upper holes to correctly mount the
appliance at the right height.
Warning Mount the screws
perpendicularly to the cabinet in order
to guarantee the correct extraction of
the sliding rails
A pilot hole is recommended for an
easier assembly.
Extract the screws to continue the
mounting.
electrolux 7
Advertisement
Table of Contents
