Download Print this page

Electrolux EIW63810X User Manual

Refreshment centre
Hide thumbs


Quick Links

User Manual
Refreshment Centre



  Related Manuals for Electrolux EIW63810X

No related manuals

  Summary of Contents for Electrolux EIW63810X

  • Page 1 User Manual Refreshment Centre EIW63810X...
  • Page 2: Table Of Contents

    2 electrolux Contents Safety information Unit positioning Appliance description Unit connection Main components Usage Rating plate Maintenance and cleaning Technical specifications Signals for users Package content What to do if... Installation Environment concerns Safety information Fundamental safety warnings Warning Do not use the appliance when extracted, except for installation, Warning The appliance must be maintenance and “What to to do if...”...
  • Page 3 electrolux 3 • Farm houses During installation and Use • By clients in hotels, motels, and other Warning Move the appliance carefully residential type of environments in order not to damage components of • Bed and breakfast type of environments the refrigeration circuit and to avoid The appliance is designed and made to gas leaks...
  • Page 4: Appliance Description

    4 electrolux Appliance description Refreshment Centre is a household • Ambient water appliance that refrigerates, purifies and • Cold sparkling water carbonates the water from the mains and • Cold still water makes ice shards. • Ice shards Its two nozzles dispense: Main components Refreshment Centre's main components Stainless steel front frame...
  • Page 5: Technical Specifications

    electrolux 5 Technical specifications Technical specifications Power Supply Voltage 230-240 V Frequency 50 Hz Power consumption MAX 260 W Cold still water dispense capacity 2lt @ 1 l/min. Cold sparkling water dispense capacity 2lt @ 1 l/min. Ice shards 200g / 2h Dispense temperature <...
  • Page 6: Installation

    6 electrolux Installation Warning It is necessary to install the • Sliding rails installation appliance properly. The power supply • Positioning in the kitchen cabinet and water connection data in the • Frontal spacer installation Technical Specifications chart must Unit connection be observed •...
  • Page 7 electrolux 7 Leave room behind the appliance as Support brackets installation described in these instructions to avoid After positioning the spacers, place the overheating. two provided support brackets. For a correct installation, take the single support bracket and place it directly in contact with both the shelf of the cabinet and the spacer if previously used.
  • Page 8 8 electrolux Sliding rails installation Position each rail on the side of the cabinet. Please note that there is a specific sliding rail for each side of the cabinet. Each sliding rail should be flush with the support brackets, with spacers when present and with the front of the cabinet.
  • Page 9: Unit Connection

    electrolux 9 Frontal spacer installation When included in the package, and if necessary, fix the frontal spacer with the 3 supplied M4x12 screws. Frontal spacer M4x12 screws Unit connection All the operations below require the appliance to be extracted from cabinet.
  • Page 10 10 electrolux Secure water discharge tap Warning Water leakage will occur when the discharge tap is open Warning Close the water discharge tap if open. A red safety screw prevents the accidental opening of the tap. Water inlet 3/4” During regular appliance operation, when Filter cartridge first installation not otherwise indicated, the tap shall be Warning Make sure there are no...
  • Page 11: Usage

    electrolux 11 Pull out the CO₂-labeled tube and its fitting placed on the left side of the appliance and then insert the fitting in the CO₂ pressure reducer. CO₂ bottle first installation Warning While screwing on the new CO₂ bottle, CO₂ leaks might occur With rechargeable CO₂...
  • Page 12 12 electrolux First Start-up Pressure has to be regulated between 2 and 3 bar operating on the plastic knob. Warning Dispense 3 litres of cold still water and 1 litre of cold sparkling To regulate the pressure, pull up the water water to rinse out well the water coils plastic knob.
  • Page 13: Maintenance And Cleaning

    electrolux 13 Dispensing during first start-up Place a glass on the drip tray, then select the desired beverage or the ice shards. During first start-up ambient water is Press the icon until the desired amount immediately ready. has been dispensed. The first ice shards will be ready after 90 Dispensing is indicated by the LED minutes.
  • Page 14 14 electrolux Drainage of the water tank 10.Push back the appliance until it is locked into position Warning If you had to stop pressing Food grade CO₂ bottle replacement the power icon, please press it again and keep it pressed in order to Warning While screwing on the new complete the step CO₂...
  • Page 15 electrolux 15 Cleaning of the inlet filter Water inlet and inlet filter housing Carry out this procedure on a yearly basis. 1. Remove the grid of the drip tray to easily pull out the Refreshment Centre. After extracting the appliance, place the grid back in its original position 2.
  • Page 16 16 electrolux 10.Insert the filter cartridge in the filter 1. Dispense all the ice shards head by pushing it up and rotating it 2. Remove the grid of the drip tray to counter-clockwise easily pull out the Refreshment Centre. 11.Push back the appliance until it is After extracting the appliance, place locked into position the grid back in its original position...
  • Page 17: Signals For Users

    electrolux 17 11.Turn on the power switch 15.Insert the filter cartridge in the filter head by pushing it up and rotating it 12.Immediately press the light icon and counter-clockwise keep it pressed until LEDs start scanning 16.Press the power icon until LEDs start scanning again If the power LED became steady, please repeat the two last steps until...
  • Page 18: What To Do If

    18 electrolux What to do if... Warning All repairs should be carried out by authorised technicians Problem Cause Resolution Cold sparkling water sprays Carbonator limit reached Stop the dispensing and wait 20 CO₂ gas seconds, then start dispensing again Water is not dispensed No water supply Check water supply Inlet water low pressure...
  • Page 19: Environment Concerns

    electrolux 19 Check if there is water inside the base, Left rear side water leakage sensor especially near water leakage sensors, Right rear side water leakage sensor then dry it carefully. Left middle side water leakage sensor Cold restart Turn off the appliance for 30 minutes, then turn it on again.
  • Page 20 942490226 – 00 – 112009...