Table of Contents
Advertisement
Pull out the CO₂-labeled tube and its
fitting placed on the left side of the
appliance and then insert the fitting in the
CO₂ pressure reducer.
CO₂ bottle first installation
Warning While screwing on the new
CO₂ bottle, CO₂ leaks might occur
The CO₂ bottle is placed on the left side of
the appliance.
The appliance can operate with both
disposable and rechargeable CO₂ bottles.
With disposable CO₂ bottles
1. Remove the plastic cap
2. Screw the bottle rotating it clockwise
on the pressure reducer
Usage
Front touch control panel
Warning To prevent damages to the
touch control panel, do not touch it
with wet or oily hands
1
Empty CO₂ bottle LED
2
Power LED (to be used also during
water tank draining)
3
Ambient water LED
With rechargeable CO₂ bottles, an
adapting junction is provided with the
pressure reducer.
1. Screw the adapting junction rotating it
clockwise on the pressure reducer
2. Screw the bottle rotating it clockwise
on the adapting junction
Make sure the CO₂ bottle is tightly fixed.
1. Lock the bottle in the bottle holder on
the left side of the appliance
2. Fix the holder with the provided safety
strip
4
Cold sparkling water LED
5
Cold still water LED
6
Ice shards LED
7
Light LED
8
Filter LED
electrolux 11
Advertisement
Table of Contents
