Table of Contents
Advertisement
1. Remove the grid of the drip tray to
easily pull out the Refreshment Centre.
After extracting the appliance, place
the grid back in its original position
2. Turn off the appliance using the power
switch
Water may come out from the filter
cartridge, therefore place a cloth on
the filter head and cartridge to prevent
the cabinet from getting wet.
If there is water on the base, dry it
carefully.
3. Rotate the used filter cartridge
clockwise and pull it down to extract it
4. Insert the new filter cartridge in the
filter head by pushing it up and rotating
it counter-clockwise
5. Turn on the power switch
6. Immediately press the ambient water
icon and keep it pressed until LEDs
start scanning.
Wait for all LEDs to turn off before
proceeding with the next step
If the power LED becomes steady,
please repeat the last two steps until
LEDs start scanning.
7. Restart the appliance using the power
switch
8. Push back the appliance until it is
locked into position
9. Dispense 3 litres of cold still water
10.Dispense 1 litre of cold sparkling water
Cleaning of the inlet filter
1
Water inlet and inlet filter housing
Carry out this procedure on a yearly basis.
1. Close the water mains
2. Dispense ambient water until it stops
coming out
3. Remove the grid of the drip tray to
easily pull out the Refreshment Centre.
After extracting the appliance, place
the grid back in its original position
4. Rotate the filter cartridge clockwise and
pull it down to extract it
5. Take out the water inlet hose
6. Extract the inlet filter with rounded-jaw
pliers
7. Clean the inlet filter
8. Insert the inlet filter and place it in its
original position
9. Insert the water inlet hose and place it
in its original position
electrolux 15
Advertisement
Table of Contents
