Table of Contents
Advertisement
14 electrolux
Drainage of the water tank
Warning If you had to stop pressing
the power icon, please press it again
and keep it pressed in order to
complete the step
Warning After the procedure always
remember to close the water
discharge tap to avoid water leakage
1. Dispense all the available ice shards
2. Remove the grid of the drip tray to
easily pull out the Refreshment Centre.
After extracting the appliance, place
the grid back in its original position
3. Connect the plastic hose to the
discharge water nozzle
4. Place a big container underneath the
plastic hose or put the hose in a sink
5. Press the power icon until power LED
starts flashing
6. Remove the safety screw and open the
water discharge tap
7. Press the power icon again and keep it
pressed until the power LED stops
flashing
8. Close the water discharge tap and
reinsert the safety screw
9. Restart the appliance using the power
switch
10.Push back the appliance until it is
locked into position
Food grade CO₂ bottle replacement
Warning While screwing on the new
CO₂ bottle, CO₂ leaks might occur
1. Remove the grid of the drip tray to
easily pull out the Refreshment Centre.
After extracting the appliance, place
the grid back in its original position
2. Remove the safety strip of the CO₂
holder to extract the used bottle
3. Hold the pressure reducer and turn the
CO₂ bottle clockwise
4. Screw the new bottle, counter-
clockwise, into the pressure reducer
5. Secure the new CO₂ bottle to its holder
and fix it with the provided safety strip
6. Push back the appliance until it is
locked into position
Filter cartridge replacement
Warning In case of water leakage dry
the base carefully
Warning Lay a cloth under the filter
cartridge to prevent the base from
getting wet
Advertisement
Table of Contents
