See diagram:
To adjust InO.S.
•
Go to InO.S. on the display and press the enter button 1 time PE1 will appear –Press Enter, this is the start
time for interval number 1 use the up and down buttons to change the times and press Enter to go to the
next number, once all numbers have been entered press and hold the enter button down for 3 seconds
and PASS will appear
•
Use the same procedure to enter the ending time for interval number 1 use the UP and Down buttons down
until this number is correct once all numbers have been entered press and hold the enter button down for
3 seconds and PASS will appear. Interval is saved.
•
PE2 will now appear on the display, follow the same procedure as PE1, starting the time 1 minute after the
end of interval 1
In Out Shift Intervals
Company
Date
Example From
PE1
PE2
PE3
PE4
Actual
From
PE1
PE2
PE3
PE4
PE5
PE6
PE7
PE8
PE9
PE10
PE11
PE12
Page 5 of 6
To
7:00
11:00
11:01
13:20
13:21
16:30
16:31
20:00
To
06‐0421‐000 Rev. B