•
If you do not require a second or third fingerprint to be registered, press cancel and the next user will
appear in the small display. To register a second and third fingerprint, see below.
•
The LED display will read F.P.2.1 – to register a second fingerprint follow the above steps, remember to use
a different finger
•
If you desire to enter a third fingerprint continue with the same steps using the selection F.P.3.1 – to
register a third fingerprint.
•
To create the number U002:
001 first 0 is blinking to change press up or down button press enter
o
001 second 0 is blinking to change press the up or down button press enter
o
001 last number will be blinking press the up or down button to get 2 then press enter and hold
o
for two seconds
•
Follow the steps above until all the employees are registered.
•
To exit the ADD.U program press Cancel until ADD.U appears on the small LED display.
For administrators
•
To enter Administrative fingerprint: when ADD.U appears, press the enter button until U001 appears on
the screen. Press the up button 2 times and A301 should appear. Then follow the same procedure to add
administrator's fingerprint.
•
Continue on to Real Time Clock (RTC) and Duration (DUR) settings
See diagram:
Admin
A101
A102
A103
Employee
U001
U002
U003
U004
U005
U006
U007
U008
U009
U010
U011
U012
U013
U014
U015
Use separate sheet for more than 15 employees
Emp. Name
Emp. Number
Page 3 of 6
06‐0421‐000 Rev. B