Panel Descriptions; Front Panel - Roland DUO-CAPTURE EX Owner's Manual

Introduction

Panel Descriptions

Front Panel

1
INPUT 1, 2 jacks (combo jacks)
1
These are analog audio input jacks with microphone preamps.
They accommodate both XLR connectors and 1/4-inch phone
type jacks, and support both balanced and unbalanced
connections.
INPUT.1,.2.jacks
XLR.connector
Phone.type.plug
MEMO
• To prevent malfunction and equipment failure, always turn down the volume and turn off all
devices (except the computer) before making any connections.
• DUO-CAPTURE EX is equipped
with balanced (XLR/TRS) type
jacks. Wiring diagrams for these
jacks are shown here. Make
connections after first checking
the wiring diagrams of other
equipment you intend to connect.
• Set the [INST] switch (p. 9) and [PHANTOM] switch (p. 9) as appropriate for the audio device that
is connected.
• Use a microphone with an XLR connector. The sound level will be very low if
you use a microphone with a phone type plug.
• When connecting a guitar or bass, use the INPUT 1 jack. The sound level will
be very low if you connect directly to the INPUT 2 jack.
6
2 3
Input.sensitivity
-60– -12 dBu
-46–+2 dBu
1: GND
2: HOT
3: COLD
4 5 6
Phone.type.plug.
HOT (TIP)
XLR.connector.
(balanced)
TRS.phone.
type.plug.
(unbalanced)
(balanced)
GND (SLEEVE)
COLD (RING)